OptixPanel Graphic Terminals
Ready to run
OptixPanel™ graphic terminals provide the right hardware to run the correct Optix license size: it is already tuned up and can be run at first power-up
All-in-one hardware + software solution
Simplified product selection
More cost-effective
ARM-based hardware, at a lower price point than x86 platforms
Locked-down system
A pre-installed, closed OS and firmware can help reduce risk in implementation and maintenance
OptixPanel™ graphic terminals 2800C & 2800S
- OptixPanel™ Compact terminals (2800C)
- Small formats: starting from 4.3” LCD
- Single-touch resistive or multitouch PCAP screens
- More cost-effective
- OptixPanel™ Standard terminals (2800S)
- High-end performance
- Four types of bezels available - three with resistive touch, one with PCAP touch screen
- Stainless-steel IP69K hygienic bezel available
- Ten LCD sizes
- Four sizes in 4:3 aspect ratio
- Six sizes in widescreen
- ATEX certified configurations available
- •Brandless units available for all product versions
OptixPanel™ Compact graphic terminals: interfaces
Back side I/O shield
1x USB 2.0 port
Connect to mouse or other peripherals
Isolated power supply
For greater noise immunity
System light-emitting diode (LEDs) and Reset/factory restore buttons
Enable troubleshooting and maintenance
1x Gigabit Ethernet port
10/100/1000Mbps
Serial port RS232/422/485(DB9M)
Connect to third-party devices with built-in protocol drivers
Serial port Tx/Rx activity light-emitting diode (LEDs)
Show port activity to aid in comms troubleshooting
OptixPanel™ Standard graphic terminals: interfaces
Back side I/O shield
2x USB 3.0 port
Connect to mouse or other peripherals
Isolated power supply
For greater noise immunity
2x Gigabit Ethernet ports
10/100/1000Mbps
Operate independently on two separated networks
microSD™ slot (with cover)
For configuration and application backup
microSD™ slot (with cover)
For configuration and application backup
Light-emitting diode (LEDs)
Reset/factory restore push buttons
Serial port Tx/Rx activity light-emitting diode (LEDs)
Aluminum Wide
True Flat PCAP Wide
Stainless-steel Wide
Aluminum 4:3
True Flat 4:3
- Basic solution with a single-touch resistive sensor
- Black anodized aluminum frame, poly foil screen
- Our most cost-effective family
- True Flat surface with no edge between LCD area and frame
- PCAP multitouch sensor
- Neutral anodized aluminum frame, glass screen with black outline
- Flat surface with no edge between LCD area and frame
- Single-touch resistive sensor
- IP69K ingress protection with blue food-grade gasket
- Neutral stainless-steel frame
- Basic solution with a single-touch resistive sensor
- Black anodized aluminum frame, poly foil screen
- Our most cost-effective family
- Flat surface with no edge between LCD area and frame
- Single-touch resistive sensor
- Neutral anodized aluminum frame, poly foil screen with black outline
Available LCD sizes:
4.3’’ | 7’’ | 10.1’’ | 12.1 ’’
15.6 ’’ | 18.5 ’’ | 21.5’’
Available LCD sizes:
4.3’’ | 7’’ | 10.1’’ | 12.1 ’’
15.6 ’’ | 18.5 ’’ | 21.5’’
Available LCD sizes:
10.1’’ | 12.1 ’’ | 15.6 ’’
18.5 ’’ | 21.5’’
Available LCD sizes:
10.4’’ | 12’’ | 15’’
Available LCD sizes:
10.4’’ | 12’’ | 15’’